You are here:
< Back


yarn add @arkecosystem/core-snapshots




Notable Dependencies


The core-snapshots and core-snapshots-cli packages facilitate the process of creating, verifying, and applying blockchain backups. This suite of packages can be used to create regular database backups in a serialization format understood by all Qredit Core nodes.

In order to ensure that snapshots are usable across the network, it is often helpful to establish a common standard of data serialization. If all nodes agree on a single ruleset governing how blockchain data maps into a database representation, it becomes much easier to compare, validate, and verify snapshots created by different nodes. core-snapshots offers three such standards, also known as codecs, covering a wide range of use cases:

  • The lite codec utilizes a MessagePack encoding format with Qredit-specific key-value pairs. This encoding format is faster than the core format, but results in larger backup file sizes, as keys are stored alongside their respective values
  • The core codec uses Qredit’s serialize and deserialize standards in creating the backup. As the Qredit serialization protocol does not include key data, this codec results in smaller database backup sizes. However, this density comes at the expense of performance, as Qredit serialization (currently) cannot match MessagePack’s encoding and decoding speed.
  • The msgpack codec uses MessagePack without any Qredit-specific standards. As this codec has no specific knowledge of Qredit serialization, this option is both the fastest and the most inefficient in terms of snapshot file size.

With all options, the tradeoff to keep in mind is performance vs filesystem impact. If you have a external storage solution for backups and limited computational resources, using msgpack will ensure maximum performance across all potential use cases. Alternatively, if your node setup is robust and backup creation speed is not a relevant factor, the core codec might be the right choice.

If you’re unsure of which to choose, use the lite codec. Generally speaking, it offers the best tradeoff between performance and impact.


The core-snapshots-cli is a command-line interface designed to help developers automate their backup creation workflow. While the commands themselves can be found in core-snapshots-clipackage.json file, the source code behind these commands can be found in the bin/snapshot file.

The following options are available to all commands:

  • -d / —data: specifies which data directory should be used as a destination for snapshots. default is ~/.qredit
  • -c / —config: specifies where the network configuration file can be found. default is ~/.qredit/config
  • -t / —token: specifies which token data should be exported. default is qredit
  • -n / —network: specifies which network should be exported
  • —skip-compression: specifies whether the specified action should compress its output using gzip or not. default is false
  • —trace: specifies whether snapshot details should be logged to console for error tracing. default is false

Create A Snapshot

Calling the create CLI command prompts your node to create a backup and save it in the data directory specified at runtime. The folder name will follow the format {data}/snapshots/{network}/{startblock}-{endblock} and contains transactions.liteblocks.liteand meta.json.

Creating a fresh new snapshot

To create a snapshot, navigate to the core-snapshots-cli package and run the following command:

yarn create:devnet

The command will generate snapshot files in your configured folder. By default this folder will be in ~./qredit/snapshots/NETWORK_NAME. Files names follow the pattern: {TABLE}.{CODEC} For example, running yarn create:devnet will create the following files in the folder ~./qredit/snapshots/devnet/0-331985/:

  • blocks.lite
  • transactions.lite

The codec used can be specified using the —codec flag, for example:

yarn create:devnet --codec core

The folder 0-331985 indicates that the snapshot includes data between block 0 and block 331985.

Using the optional —start and —end flags will specify a lower and uppers bounds for the snapshot, allowing you to customize your backups to your specific needs.

The following options are available when using the create command:

  • -s / —start: specifies a starting network height from which to create the snapshot
  • -e / —end: specifies an ending network height for the snapshot
  • —codec {STRING}: use the string input to specify a codec
  • -b / —blocks: used to specify a snapshot to append to (see next section

Append Data to an Existing Snapshot

Appending data to existing snapshots can help manage snapshot size and improve snapshot import speeds. The command is the same as creating a snapshot with additional parameter for -b or --blocks. This flag allows you to specify he existing snapshot blocks/folder you want to append to.

To use the --blocks flag, provide the 0-331985 blocks number or folder name as an argument:

yarn create:devnet --blocks 0-331985

Note that all appends create new backup folders and leave the original snapshot intact. To preserve hard disk space, remove old backups if you are sure your appended snapshot is valid.

Importing a snapshot

The import command allows you to restore your Qredit Core node with data from a backup you previously created.

Importing new snapshots should not be done while your node is still running, as running a blockchain node without blockchain data can lead to unexpected behavior.

Snapshot filename must be specified:

yarn import:devnet -b 0-331985

If you want to import from block 1, e.g. empty database first, you should run the yarn truncate:NETWORK_NAME command.

yarn truncate:devnet

Alternatively, add the —truncate flag to the import command to truncate and import with one command:

yarn import:devnet -b 0-331985 --truncate

By default, the block height is set to last finished round (blocks are deleted at the end). If you have more snapshots files following each other, then you can disable this behavior with the --skip-revert-round flag. If this flag is present, block height will not be reverted at the end of import to last completed round.

If you want to do additional crypto.verify check for each block and transaction a flag --signature-verify can be added to the import command

yarn import:devnet --blocks 0-331985 --truncate --signature-verify

Please note that this will increase the import time drastically.

The following options can be added to the import command at runtime:

  • -b / —blocks: specify a snapshot to import from
  • —codec {STRING}
  • —truncate: specify whether the database should be cleared before starting import
  • —skip-restart-round: specify whether your node should revert to latest round after DB import. default is false
  • —signature-verify: specify whether signatures should be verified during import (see below). default is false

Verify Existing Snapshot

Verifying a snapshot with the verify command involves running checks on a snapshot to ensure all signatures are cryptographically valid and that block hashes follow each other in a logical progression to create a valid blockchain.

Please note that the verify command does not interact with the database in any way. It is therefore safe, and a good idea, to verify all snapshots prior to importing them into your Qredit Core node.

yarn verify:devnet --blocks 0-331985

You can also just verify the chaining process and skip signature verification with --skip-sign-verify option.

yarn verify:devnet --blocks 0-331985 --skip-sign-verify

Note that database verification is run by default whenever a node boots up. Although this procedure ensures network consistency, importing an invalid snapshot will increase the amount of time it takes your node to sync with the network. Trust, but verify — even with your own snapshots.

Rollback Your Chain

The rollback command can be used to roll your blockchain database back to a specific height. This can be useful to manually alter your blockchain structure in case the rollback features included in Qredit Core are not specific enough for your use case.

The following command will rollback the chain to block height of 350000:

yarn rollback:devnet -b 350000

If the -b or --block-height argument is not set, the command will rollback the chain to the last completed round.

Rollback command also makes a backup of forged transactions, ensuring that no local history is accidentally deleted in a rollback. Transactions are stored next to the snapshot files (in ./qredit/snapshots/NETWORK_NAME). File is named rollbackTransactionBackup.startBlockHeight.endBlockHeight.json.

For example: rollbackTransactionBackup.53001.54978.json contains transactions from block 53001 to block 54978.


Behind the scenes, core-snapshots uses NodeJS streams to process export and import commands. The export and import pipelines are modified based on various runtime options, such as whether the output should be gzipped or not. Here is a condensed version of the business logic behind the exportcommand:

exportTable: async (table, options) => {
    const snapFileName = utils.getPath(
    const codec = codecs.get(options.codec)
    const gzip = zlib.createGzip()
    await fs.ensureFile(snapFileName)

    try {
      const snapshotWriteStream = fs.createWriteStream(
        options.blocks ? { flags: 'a' } : {},
      const encodeStream = msgpack.createEncodeStream(
        codec ? { codec: codec[table] } : {},
      const qs = new QueryStream(options.queries[table])

      const data = await, s => {
        if (options.meta.skipCompression) {
          return s.pipe(encodeStream).pipe(snapshotWriteStream)

        return s
        `Snapshot: ${table} done. ==> Total rows processed: ${
        }, duration: ${data.duration} ms`,

      return {
        count: utils.calcRecordCount(table, data.processed, options.blocks),
        startHeight: utils.calcStartHeight(
        endHeight: options.meta.endHeight,
    } catch (error) {
      app.forceExit('Error while exporting data via query stream', error)

You can find more information about streams and pipes in the NodeJS documentation.

Default Settings

  codec: 'lite',
  chunkSize: 50000,
Last Updated On January 26, 2019